Keep your burst water heater from causing catastrophic structural damage to your home. Knowing what to do when your water heater bursts will help you quickly clean up the water and prevent severe damage to your home.
alpharettawaterdamageremoval.com gathered information about what to do when your water heater bursts and floods your home.
Water Heater Burst
A burst water heater can be a nightmare. It can cause extensive water damage to your home and belongings if not promptly and properly handled. If you find yourself stepping in floodwater from your burst water heater, here are six steps to prevent extensive water damage and remove the water.
Step 1 – Turn off the water heater’s power supply. The first thing you should do when you discover a burst water heater is to turn off the power supply. If you have an electric water heater, turn off the power at the breaker box. If you have a gas water heater, turn off the gas valve.
Step 2 – Turn off the water supply. Next, turn off the water heater’s water supply. The shut-off valve is typically located near the water heater, on the cold water inlet pipe. Turn the valve clockwise to shut off the water supply.
Tip: If the water supply is left open, water will continue leaking and flooding your home.
Step 3 – Drain the water heater. Once you have turned off the water heater’s power and water supply, drain the water heater. Locate the drain valve (at the bottom of the water heater), attach a garden hose to the valve, and run the hose’s other end to a nearby drain or outside.
Open the valve and allow the water to drain completely. If your water heater is in the basement or lower level, use a sump pump to remove the water.
Step 4 – Remove the floodwater After draining the water heater. It is crucial to remove any standing water. Use a wet/dry vacuum or mop to efficiently remove the water from your home. If the water has flooded the carpet or flooring, use a carpet cleaner or hire a professional to remove the water, dry it, and sanitize the area.
Step 5 – Dry your home. After removing any standing water, it’s essential to completely dry the affected area. Use fans and dehumidifiers to circulate the air and remove any moisture or humidity. If the area is not completely dry, mold and mildew can quickly develop, which can cause or aggravate preexisting health problems.
Step 6 – Call a professional. If you’re not comfortable with or unsure about handling a burst water heater, or if the damage is extensive, call a professional. A plumber can repair or replace the water heater, while a water damage restoration company can handle the water damage and ensure your home is safe and dry.
Note: A burst water heater can quickly cause extensive water damage if not properly handled. If you are unsure of what to do, call a professional.
What Causes a Water Heater to Leak or Burst
A water heater is an essential appliance designed to provide continuous hot water for your home. However, a water heater can leak or malfunction, causing significant damage if it bursts. Understanding common water heater burst causes can help you take steps to prevent them from occurring in your home.
Age – The more common cause of water heater bursts is old age. Over time, the unit’s tank can corrode, weaken, and crack, leading to leaks and, eventually, a burst. Most water heaters have a 10 to 15-year lifespan, highlighting the importance of regularly inspecting your water heater to ensure its good condition.
Sediment Buildup – As the water heats and cools, sediment may build up inside the tank, quickly leading to corrosion, added weight, and an eventual burst. Flushing the tank regularly can help remove sediment buildup and prevent tank damage.
High Water Pressure – High water pressure can strain the water heater tank, causing it to weaken and burst. It’s essential to have a pressure regulator installed in your home to prevent high water pressure from damaging your water heater and other water-based appliances.
Improper Installation – If your water heater was installed improperly, it can put additional stress on the tank and cause it to burst. It’s essential to have your water heater installed by a licensed professional to ensure it’s level and properly connected.
Overheating – If the water heater’s temperature gets too high, it can cause the tank to expand and weaken, leading to a burst. Most water heaters have a temperature and pressure relief valve designed to prevent this, but it’s essential to have the valve checked regularly to ensure it is working properly.
Rust – Rust can severely weaken the tank and cause it to burst. If you notice rust on your water heater, it’s a sign the tank may be corroding on the inside.
Tip: Regular maintenance and inspections can help prevent these issues and ensure your water heater is operating well. If you notice any signs of potential problems, it is crucial to have it inspected and serviced by a licensed professional.
Water Heater Malfunction
In this article, you discovered what immediate actions to take when your water heater malfunctions and floods your home.
When your water heater bursts, your quick response will help you get the water removed and your home cleaned up and prevent extensive water damage.
Your delay in handling a water heater burst can lead to your home suffering severe structural damage, electrical and gas problems, and costly cleanup.
Sources:
doh.wa.gov/emergencies/be-prepared-be-safe/get-ready/water-heaters-how-secure-them
energystar.gov/products/ask-the-experts/when-should-you-replace-your-water-heater
labor.maryland.gov/labor/safety/boilhw.shtml
sandiegocounty.gov/content/sdc/sdhcd/rental-assistance/current-participants/inspections/tp-drain-valves/_jcr_content/par/
centralplumbing.org/water-heater-problems/
(678) 505-0266